Suche starten
Sign in

Here you get access for your webmail!

Enter your e-mail address:

Password:

Vintage Pickup 10/40M

« Back
Vintage Pickup 10/40M

Pickup with mirror chrome finish metal housing, for steelstring guitars. Superflat design. Can be screwed or glued onto the top or alternatively attached to the neck or fretboard respectively.

All Schaller pickups are manufactured to the highest quality requirements and the most demanding quality standards:

  • In order to avoid deviations, the number of coil windings are controlled with utmost care.
  • For a constant sound quality and reduced microphonics, all relevant metal parts are made of German silver.
  • To avoid microphonic problems, all coils are vacuum-potted by means of a unique method.

Our PickupFinder with all information about musical applications, technical specifications, wiring diagrams and much more can be viewed directly on our homepage.

Versions

Model ArtNo. ModelFinishDC-resistance/ kOhmSurfaceModelMeasurements l x w x h (mm)Weight g/item
10/40M 		402 Polished Chrome For Neck Mounting 74x26x11 190

Images

Technical drawing

To view the complete technical drawing, please use the download file.

Note: Acrobat Reader is required to view PDF files correctly!

Installation instructions

To view the complete installation instructions, please use the download file.

Note: Acrobat Reader is required to view PDF files correctly!

Downloads

Technical drawing

Installation instructions

Note: Acrobat Reader is required to view PDF files correctly!

Here you will find some additional, useful information about our Schaller product catalog.

Schaller Pickups, Single Coils and Humbucker Schaller Pickups, Bass Pickups

Measure specifications

All measurements in the product catalogue are given in mm (inch), unless a different unit of measurement is stated.

 

Technical drawings and operating instructions

We do not accept any liability for the correctness of the technical drawings. Prior to installation, please measure for yourself once more, so you can consider regular manufacturing tolerances.

Please note that the technical data can also vary slightly, depending on the surface color. This is due to the difference in the galvanic coating and the galvanic layering, which depends on the color (nickel, chrome etc).

The technical drawings can be printed on one page width. Should the technical drawings not fit on one page, however, please check your print page setup (note: they can be several pages long).

From time to time, the measurements given in the file downloads on our website may differ from those given in the catalogue. Please bear in mind that the measurements given in the online downloads are current. Any discrepancies will be corrected when the catalogue is updated.

Schaller Technical Drawing

 

Humbucking Pickups

All of our single-pole Humbucker pickups are built to fit in any common frame.
Our frames provide mounting with four height adjustment screws to prevent tilting. When winding the coils we pay special attention to the precise matching of each pair of coils – essential for ensuring 100% humbucking function.
As with our single-coil pickups, all Humbucker coils are soaked in a special process
to minimize microphone feedback.
The single-pole Humbuckers offer variable pole piece spacing at neck and bridge pickups, which permits full use of the magnetic field.
All pickups are available in Cream, Black or Cream Black (Humbuckers only).

Kinds of Strings

Steel strings can be used with all pickpus.
The following table shows which pickups can also be used with nylon/gut strings:

ArtikelgroupModelArticlenr.Nylon/Gut Strings
Oyster Pickups10/82721X
Oyster Pickups10/83722X
Oyster Pickups10/84723X
Oyster Pickups10/85724X
Oyster Pickups10/86725x
Oyster Pickups10/87726x
Oyster Pickups10/88727x
Oyster Pickups10/89728x
Piezo Pickups10/95747X
Piezo Pickups10/95S747 SX
Piezo Pickups10/95S-17470SX
Piezo Pickups20007495X
Piezo Pickups30007496X
Piezo PickupsASD +7217498X
Piezo PickupsASD +7477498-1X
Piezo PickupsASD +74957498-2X
Piezo PickupsASD +74967498-3X

Our zither pickups with the article numbers 408 and 412 are designed for steel strings. If you wish to use nylon strings, please order article number 409, which is our piezo pickup for zither.

Using the product catalog

Please change your print settings to landscape before printing these pages so that the guidelines are complete and readable.

 

 

FAQ

FAQ60001 Where can I get wiring diagrams for pickups?

Please use our Pickup Finder, or take a look at the product details or under "Downloads", where we have provided all technical data and wiring diagrams in a downloadable format for your use. Multiple downloads can be found using our Pickup Finder and in the product details: technical drawings, tone descriptions, wiring diagrams etc. These will help you in finding the pickup that is right for you, as well as in installing and connecting it without any problems.

FAQ60010 At what voltage can I use Schaller active pickups?
Our active pickups are fed in parallel with 9 Volts each. Therefore, please do not exceed this voltage.