Depending on the model, all frames are either made of solid metal or high-quality plastic materials (black and cream). Available with flat or curved bottom side. Screws and springs included.
Pickup Frames
« BackVersions
Technical drawing
To view the complete technical drawing, please use the download file.
-
TZ Pickup Zubehör/Accessories Rahmen/Frames Metall Gebogen/Metal, Curved Hoch 1/2 Zoll/High 1/2 inch
-
TZ Pickup Zubehör/Accessories Rahmen/Frames Metall Gerade/Metal, Straight Hoch 1/2 Zoll/High 1/2 inch
-
TZ Pickup Zubehör/Accessories Rahmen/Frames Metall Gebogen/Metal, Curved Flach 1/4 Zoll/Flat 1/4 inch
-
TZ Pickup Zubehör/Accessories Rahmen/Frames Metall Gerade/Metal, Straight Flach 1/4 Zoll/Flat 1/4 inch
-
TZ Pickup Zubehör/Accessories Rahmen/Frames ABS Gerade/Straight Flach 1/4 Zoll/Flat 1/4 inch
-
TZ Pickup Zubehör/Accessories Rahmen/Frames ABS Gerade/Straight Hoch 1/2 Zoll/High 1/2 inch
Note: Acrobat Reader is required to view PDF files correctly!
Downloads
Technical drawing
- TZ Pickup Zubehör/Accessories Rahmen/Frames Metall Gebogen/Metal, Curved Hoch 1/2 Zoll/High 1/2 inch
- TZ Pickup Zubehör/Accessories Rahmen/Frames Metall Gerade/Metal, Straight Hoch 1/2 Zoll/High 1/2 inch
- TZ Pickup Zubehör/Accessories Rahmen/Frames Metall Gebogen/Metal, Curved Flach 1/4 Zoll/Flat 1/4 inch
- TZ Pickup Zubehör/Accessories Rahmen/Frames Metall Gerade/Metal, Straight Flach 1/4 Zoll/Flat 1/4 inch
- TZ Pickup Zubehör/Accessories Rahmen/Frames ABS Gerade/Straight Flach 1/4 Zoll/Flat 1/4 inch
- TZ Pickup Zubehör/Accessories Rahmen/Frames ABS Gerade/Straight Hoch 1/2 Zoll/High 1/2 inch
Note: Acrobat Reader is required to view PDF files correctly!
Here you will find some additional, useful information about our Schaller product catalog.
Surface finishing
These Schaller Pickup-Covers are an example of the subtle differences between various surface finishes.
![]() ![]() ![]() | ||
| NI-Nickel | CH-Chrome | SC-SatinChrome |
![]() ![]() ![]() | ||
| BC-BlackChrome | GO-Gold | RU-Ruthenium |
![]() ![]() | ||
SP-SatinPearl | VC-VintageCopper | |
Measure specifications
All measurements in the product catalogue are given in mm (inch), unless a different unit of measurement is stated.
Technical drawings and operating instructions
We do not accept any liability for the correctness of the technical drawings. Prior to installation, please measure for yourself once more, so you can consider regular manufacturing tolerances.
Please note that the technical data can also vary slightly, depending on the surface color. This is due to the difference in the galvanic coating and the galvanic layering, which depends on the color (nickel, chrome etc).
The technical drawings can be printed on one page width. Should the technical drawings not fit on one page, however, please check your print page setup (note: they can be several pages long).
From time to time, the measurements given in the file downloads on our website may differ from those given in the catalogue. Please bear in mind that the measurements given in the online downloads are current. Any discrepancies will be corrected when the catalogue is updated.











