Versions

Model	ArtNo.	Weight g/item	Options	Finish	Model
Pick-Box	1991	250	36 Pieces per typ	6 Types	Plastic
Refill Bag	19722	100	72 Pieces per typ	6 Types	ABS
Pick-Dispenser	191100	34	12 Pieces selectable	6 Types	ABS
Auto-Dispenser	199420	6800	2000 pieces in total	6 Types	Metal/Acrylic
Refill Tubes	19912	280	0,457 mm/0,018 inch		With 400 Picks Super Light 0.018 Red
Refill Tubes	19914	300	0,609 mm/0,024 inch		With 395 Picks Light 0.024 Orange
Refill Tubes	19913	280	0,685 mm/0,027 inch		With 380 Picks Medium Light 0.027 Yellow
Refill Tubes	19910	280	0,838 mm/0,033 inch		With 300 Picks Medium 0.033 Green
Refill Tubes	19915	300	0,990 mm/0,039 inch		With 270 Picks Medium Heavy 0.039 Blue
Refill Tubes	19911	300	1,092 mm/0,043 inch		With 250 Picks Heavy 0.043 Purple
Single Pick Red	199012	280	0,457 mm/0,018 inch		1x Pick Super Light 0.018 Red
Single Pick Orange	199014	300	0,609 mm/0,024 inch		1x Pick Light 0.024 Orange
Single Pick Yellow	199013	280	0,685 mm/0,027 inch		1x Pick Medium Light 0.027 Yellow
Single Pick Green	199010	280	0,838 mm/0,033 inch		1x Pick Medium 0.033 Green
Single Pick Blue	199015	300	0,990 mm/0,039 inch		1x Pick Medium Heavy 0.039 Blue
Single Pick Purple	199011	300	1,092 mm/0,043 inch		1x Pick Heavy 0.043 Purple

Here you will find some additional, useful information about our Schaller product catalog.

Surface finishing

These Schaller Speed Knobs are an example of the subtle differences between various surface finishes.

NI-Nickel, CH-Chrom, SC-SatinChrom, BC-Blackchrom, GO-Gold, RU-Ruthenium, SP-SatinPearl, VC-VintageCopper.

To view a larger image of a product with each finish, click on the desired product in the "Versions" tab in the product catalog, and then switch to the "Description" tab. The image shown here can then be enlarged by clicking on it.

Measure specifications

All measurements in the product catalogue are given in mm (inch), unless a different unit of measurement is stated.

Technical drawings and operating instructions

We do not accept any liability for the correctness of the technical drawings. Prior to installation, please measure for yourself once more, so you can consider regular manufacturing tolerances.

Please note that the technical data can also vary slightly, depending on the surface color. This is due to the difference in the galvanic coating and the galvanic layering, which depends on the color (nickel, chrome etc).

The technical drawings can be printed on one page width. Should the technical drawings not fit on one page, however, please check your print page setup (note: they can be several pages long).

From time to time, the measurements given in the file downloads on our website may differ from those given in the catalogue. Please bear in mind that the measurements given in the online downloads are current. Any discrepancies will be corrected when the catalogue is updated.

Using the product catalog

FAQ