Suche starten
Sign in

Here you get access for your webmail!

Enter your e-mail address:

Password:

Security Locks - Nuts/Washers-Kit

« Back
Security Locks - Nuts/Washers-Kit

Complementary assortment for our Security Locks.

Content: (ArtNo., pieces, article) 

  • 445114   40 pieces Nut Nickel
  • 446114   40 pieces Nut Chrome
  • 447114   30 pieces Nut Gold
  • 1446114 40 pieces Nut BlackChrome
  • 448114   30 pieces Nut SatinChrome
  • 445112   30 pieces Washer Nickel
  • 446112   30 pieces Washer Chrome
  • 447112   20 pieces Washer Gold
  • 1446112 30 pieces Washer BlackChrome
  • 448112   20 pieces Washer SatinChrome
  • S0141     60 pieces Screws for Security Locks 3,5x25  

Spare parts are also available in Ruthenium, SatinPearl and VintageCopper on request.

Versions

Model ArtNo. ModelFinishSurfaceModelWeight g/item
Security Lock 		445-12 Nuts, Washers, Screws Polished All Assortment 850

User instructions

To view the complete user instructions, please use the download file.

Note: Acrobat Reader is required to view PDF files correctly!

Downloads

User instructions

Note: Acrobat Reader is required to view PDF files correctly!

Here you will find some additional, useful information about our Schaller product catalog.

Surface finishing

These Schaller Security Locks are an example of the subtle differences between various surface finishes.

Schaller Security Locks Schaller Security Locks Schaller Security Locks
NI-NickelCH-ChromeSC-SatinChrome
Schaller Security Locks Schaller Security Locks Schaller Security Locks
BC-BlackChromeGO-GoldRU-Ruthenium
Schaller Security Locks Schaller Security Locks

 SP-SatinPearl

 VC-VintageCopper

To view a larger image of a product with each finish, click on the desired product in the "Versions" tab in the product catalog, and then switch to the "Description" tab. The image shown here can then be enlarged by clicking on it.

Measure specifications

All measurements in the product catalogue are given in mm (inch), unless a different unit of measurement is stated.

 

Technical drawings and operating instructions

We do not accept any liability for the correctness of the technical drawings. Prior to installation, please measure for yourself once more, so you can consider regular manufacturing tolerances.

Please note that the technical data can also vary slightly, depending on the surface color. This is due to the difference in the galvanic coating and the galvanic layering, which depends on the color (nickel, chrome etc).

The technical drawings can be printed on one page width. Should the technical drawings not fit on one page, however, please check your print page setup (note: they can be several pages long).

From time to time, the measurements given in the file downloads on our website may differ from those given in the catalogue. Please bear in mind that the measurements given in the online downloads are current. Any discrepancies will be corrected when the catalogue is updated.

Technical Drawings Schaller Security Locks

 

 

Installation instructions for Security Locks (Download)

 

Schaller Installation instructions for Securtiy Lock

 

 

 

Schaller Security Lock

Using the product catalog
Please change your print settings to landscape before printing these pages so that the guidelines are complete and readable.

 

FAQ

FAQ40001 The screw holes for my Schaller security locks too are large?

Our screw dimensions are suitable for the majority of guitars such as Fender, Gibson, PRS etc. Unfortunately, it goes without saying that we cannot develop an individual security lock for every possible individual case. A larger screw alone will not suffice, as the base and the lock must also be suitably enlarged at the same time.

A method that has proved appropriate for achieving this is to fill the existing screw hole with an epoxy resin before drilling a new hole of the appropriate size. Never drill at the base to enlarge the hole for a larger screw, as doing so will void any warranty.

A detailed installation drawing can be found under "Guidelines".

FAQ40020 Can I also use Schaller security locks on acoustic guitars?

Theoretically yes, but you must screw our security locks into the frame reinforcement and not into the open frame. You can then also use our Schaller security locks on your acoustic guitars without any problems.

A detailed installation drawing can be found under "Guidelines".

FAQ40030 Where can I get replacement parts for Schaller Security Locks?
Please ask either your specialist music store or our wholesaler, both of whom will have our replacement part kits (see also product catalog) which contain all replacement parts.
FAQ40040 How do Schaller Security Locks work? How do I release the lock from the strap button?

You simply need to pull on the ball located above the screw thread. This releases the lock from the strap button so that you can remove the strap from the guitar. When you let go of the ball, the locking cylinder will snap securely back into the strap button.

A detailed installation drawing can be found under "Guidelines".